WHO WE ARE
ELITANA is established for production of Ethylene, Propylene, polyethylene, ,Methanol and chemicals
through execution of a petrochemical complex in two phases.
ELITANA is an international private company established under the Iraq investment law and is located in Basrah, Iraq.
ELITANA is established for production of Ethylene, Propylene, polyethylene, Methanol and chemicals through execution of a petrochemical complex in two phases.
ELITANA focuses on customers’ satisfaction by supplying high- quality products according to their needs and exceeding their expectations.
ELITANA ensures the commitment of all employees and contractors to continual improvement by applying methodologies that transcend quality, energy, and HSE to sustainability and business excellence.
ELITANA is committed to compliance with relevant International codes, standards, local laws, bylaws, and regulations
INVESTMENT
Total Investment for project execution in phase one and two
is estimated in the amount of : 2.3 bilion Euro
PROJECT SCHEDULE
petrochemical complex in two phases
Project Phase I
» Utility plant and infrastructure
» Olefin Plant
Project Phase II
» Polyethylene Plant
» Ethylene Oxide and MEG
» Polypropylene
» Methanol Plant
Plant Capacity
| » 2000 m3/hr filtered water |
| » 250 m3/hr demineralized water |
| » 50,000 m3/hr Sea water |
| » 2250 m3/hr Fire Fighting water |
| » 6000 Nm3/hr Instrument air |
| » 10,000 Nm3/hr Plant air. |
| » 400 ton/hr HP steam. |
Plant Capacity
| Feed, LPG | 2100 KTA |
| Ethylene | 800KTA |
| Propylene | 370 KTA |
| PY GAS | 200 KTA |
| Plant Capacity | 380,000 MT/ year |
| Feed Stock | Ethylene |
| Start up date | October 2025 |
| Polyethylene is produced by polymerization of ethylene in a fludized-bed reactor in the presence of butene-1 and hydrogen gas and the use of Zg or Cr catalyst for the production of high density polyethylene HDPE and Linear low density polyethylene LLDPE. | |
| Plant Capacity | 350,000 MT/ year |
| Feed Stock | propylene |
| Start up date | june 2025 |
| Polypropylene (PP) is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles. | |
| Plant Capacity | 500,000 MT/ year |
| Feed Stock | Ethylene/Oxygen |
| Start up date | october 2025 |
| Ethylene and oxygen are fed to a multi-tubular reactor, forming EO. This exothermic reaction, conducted in fixed beds in the reactor tubes, occurs in the gaseous phase with the use of a silver catalyst supported on alumina. Steam is generated by the heat of reaction. Ethylene oxide is reacted with CO2, forming ethylene carbonate, which is then hydrolyzed to form MEG and CO2. Both reactions are carried out in the liquid phase using homogeneous catalysts. CO2 streams from the reaction steps are recycled to the ethylene carbonate reactor. MEG is purified in two distillation columns where water is removed, leading to the final MEG product. The catalyst is separated and recycled to the ethylene carbonate reactors. | |
| Plant Capacity | 1,650,000 TON/Year |
| Feed Stock | NATURAL GAS/Oxygene |
| Start up date | october 2023 |
 |
|